Soft watercolour painting of a holiday table setting with warm candlelight, sprigs of evergreen, and dishes in rich ochre and cream tones

Chris Mapp · Eastern Shore

Long-running personal blog from Chris Mapp: snack-food tastings, retro action figures, building blocks, fishing on the Chesapeake Bay, and the occasional pop-culture reflection.

♥ Likes 💬 Comments ↗ Share

We got a wedding gun.

A long-standing interest in firearms resurfaces with a new piece from a family wedding, alongside reflections on collecting in the author's twenties and thirties.

Soft watercolour still life of small mechanical parts in muted blues and warm ochre

Enter, THE ZULLBEAST!

A new addition to the collection from January 2016, documented with the usual mix of photography and childhood-toy nostalgia.

Soft watercolour abstract in pale lavender and cream suggesting a curious figurine silhouette

Stunt Zombie's Christmas Fallout 2015!

Holiday recap from December 2015 covering Christmas gifts, Star Wars Episode VII chatter, and the Town of Exmore Christmas Parade.

Soft watercolour painting of a warm holiday scene in cream and amber tones

I'm Gonna Git You Zuckuss!

July 2013 entry on a bounty hunter figure acquired via trade with LeAnn of Retro Toy Safari, as the Star Wars Power of the Force 2 collection grows.

Soft watercolour abstract suggesting a small action figure in deep violet and ochre washes

Fun Food Friday — Froot Loops Treasures

August 2013 tasting notes on a childhood favourite cereal, plus reflections on how many cereals have changed over the years.

Soft watercolour still life of a breakfast bowl in pastel pinks, greens, and cream

League Assignment — Summer Vacation

A June 2013 League of Extraordinary Bloggers prompt on summer memories, fishing on the Chesapeake Bay, and learning the water from a 16-foot wooden scow.

Soft watercolour seascape in muted teal, sand, and warm amber tones evoking a quiet bay
See all →

Replace a Worn STEIDLE Transmission Pump Drive Coupling

A worn drive coupling on a STEIDLE transmission pump rarely fails without warning. A flexible element can crack, a spider can shred, or a rigid drive can develop wear around its fasteners. The pump may still move oil, yet rising vibration, shaft heat or metallic noise can spread damage to the pump shaft, bearings and driver. Treat the coupling as an early warning, not a nuisance part.

This repair suits a competent fitter or maintenance technician who can work to a manufacturer manual and measure alignment. Australian workshops in Melbourne, Sydney, Brisbane and Perth service imported German machinery, where an identical-looking coupling may still have a different bore, keyway, elastomer grade or torque rating.

Safety planning matters as much as mechanical skill. Under the Work Health and Safety Act 2011 and the relevant state or territory work health and safety rules, employers must provide safe systems of work, training and equipment. That means isolating every energy source, controlling hydraulic and pneumatic pressure, and preventing anyone from restarting the motor while the coupling is open.

Hot conditions in northern and central Australia, washdown chemicals, corrugated-road dust and long travel to specialist repairers make unplanned downtime expensive. Locally stocked flexible elements are useful, although imported STEIDLE assemblies may take longer to source and arrive. The distributor’s Shenzhen office handles product inquiries, pricing and availability for pumps, nozzles, hoses, oil, spare parts and micro-lubrication systems, so allow time for matching and freight.

Confirm the Coupling Type and the Actual Fault

Begin by confirming whether the fault is in the coupling, a bearing or the driver. STEIDLE transmission pumps are used with several shaft arrangements, so the installed component may be a pin-and-bush jaw coupling, an elastomer spider, a flexible disc or a rigid flange. Read the pump identification plate and service manual, and inspect the complete joint before removing guards or drive parts.

Coupling style Where it fits Points to verify
Flexible jaw coupling Motor-pump drives needing some misalignment tolerance Hub bore, keyway, insert or bush grade, and axial gap
Flexible disc coupling Higher-speed shafts with close alignment Bolt grade, disc condition, balance and angular offset
Rigid flange coupling Low-speed shafts with stable alignment Face runout, cracks and bolt torque
Sleeve or spacer coupling A defined shaft-gap arrangement Length, key fit and the original flexible-element requirement

A new element will not correct a misaligned shaft, a damaged bearing or a base that twists under load. Look for bright metal, compressed or torn rubber, oil in the joint, and heat staining that indicates slip. A coupling that repeatedly fails soon after replacement usually needs the cause investigated rather than another new insert.

Record the main symptoms before dismantling:

  • Vibration that changes with pump speed or load, especially across the motor-pump span
  • Knocking, squealing, rubbing, measurable backlash or a shredded flexible element
  • Excessive hub temperature, fresh oil leakage or a change in pump delivery

Before ordering, confirm:

  • STEIDLE model, serial number, shaft diameter, keyway and rotation
  • Driver make, bore, key size, speed, duty cycle and torque requirements
  • Complete coupling type, hub part numbers and any shaft extension
  • Oil grade, elastomer compatibility, manual and supplier availability

Photograph the installed coupling, mark the relative position of the hubs and measure the gap between halves. Record the alignment method available on site. These observations make it easier to distinguish a failed flexible element from movement caused by shaft or bearing play.

Match the Replacement and Plan the Supply Route

Order by complete assembly and part number, not merely shaft size. Verify hub bore, key dimensions, torque rating, maximum speed, balance class, elastomer hardness and any threadlocker specified by the manufacturer. Jaw hubs may be reversible or handed, so rotation and key position matter. A disc, spacer or rigid flange cannot replace a flexible element without an engineering review.

For a circulating-oil installation, check oil and seal compatibility before opening the housing. Lubricant selection guidance is a useful cross-check, but the STEIDLE manual remains controlling. Use the approved oil grade for servicing rather than an unverified substitute that may attack elastomers.

Australian buyers should plan for imported lead times, freight and currency exposure. The Shenzhen office handles inquiries, pricing and availability across pumps, nozzles, hoses, oil, spare parts, pneumatic pumps, transmission pumps and micro-lubrication systems. Keep a matched coupling and insert in local critical-spares stock when a breakdown would stop production.

Isolate Every Energy Source Before Disassembly

Stop the pump through its normal controls, then isolate it at the appropriate electrical isolator. Lock and tag the isolation in accordance with the site procedure, and verify that the motor cannot start. Electrical disconnection alone does not remove hydraulic pressure, compressed air, spring force, gravity or energy stored in a rotating shaft.

Follow the manual’s sequence for shutting down and bleeding the lubrication and oil circuits. Relieve pressure before loosening pipework, capture drained oil, and remove guards only after isolation. Wear site-appropriate eye protection, gloves, footwear and clothing; sealed couplings can hold hot oil and sharp fractured edges.

Control access while the drive is open. Australian sites often combine production, maintenance and contractor movements, so a permit, a clear exclusion boundary and one nominated person responsible for isolation prevent an unexpected start. Keep the manual, isolation record and alignment tools at the job, and record any pre-change vibration, noise or hub temperature that can safely be observed. The distributor’s general site material includes hobby and entertainment content, so it is no substitute for those controls.

Remove the Worn Coupling Without Damaging the Shafts

Mark the driver hub, pump hub and their relative angular positions before loosening anything. Photograph the assembly and note the axial gap between halves. Support the shaft and coupling as needed; remove set screws or clamping fasteners, clean threads, and apply threadlocker only if the replacement procedure calls for it.

Use the correct puller for a tight hub and never lever against a shaft end. A screw puller or approved hub-removal tool distributes force into the hub; striking the coupling or heating a shaft can damage rolling elements and alter its alignment. If a key sticks, work it out without gouging the keyway.

Inspect the shaft for runout, bruising, rust and damaged keyways, and turn the pump shaft by hand to check for roughness or a seized bearing. Check the driver shaft, alignment and nearby pipe supports before reassembly. Replace a damaged key or hub rather than reusing questionable hardware, and keep old and new elastomer parts separate so they cannot be mixed.

Fit, Align and Return the Pump to Service

Fit the new coupling according to its manufacturer’s instructions. For a jaw coupling, seat both hubs squarely and install a new, correctly matched spider without mixing old and new elements. Lubricate only if specified. Set the axial gap with the prescribed spacer or setting tool, then tighten retaining hardware to the stated torque and threadlocker requirement.

Align the shafts before applying final running clearance. Check parallel and angular offset with a straightedge and feeler gauge or a suitable laser alignment tool, staying within the coupling and pump-manufacturer limits. Correct soft foot on the driver feet with suitable shims, and remove pipe strain; forcing aligned shafts together hides the fault that damaged the coupling.

Restore guards and all covers before testing. Rotate the shaft by hand if the pump permits it, then start without load and monitor vibration, noise, hub temperature, motor current and oil delivery. Stop if vibration increases, the coupling rubs or the elastomer becomes hot. For a lubricant-fed system, the companion discussion of correct lubricant application rates explains why both too little and too much can shorten component life; follow the nozzle and hose settings in the STEIDLE documentation.

When the repair passes a short supervised run, record the replaced part numbers, measured alignment, torque values and oil used in the maintenance history. Keep the worn element for failure analysis unless disposal rules require otherwise. For current pricing, lead times and availability, contact the distributor’s Shenzhen office with the pump model, serial number, shaft dimensions and a clear photograph of the old coupling before ordering.

Toys & Collectibles

Star Wars Power of the Force 2 figures, Lego and knockoff building block reviews, and trades with fellow collectors.

Read toy posts →

Fun Food Friday

Weekly snack food and restaurant spotlights, from Hostess Fruit Pies to Froot Loops Treasures and beyond.

Read food posts →

Life & Hobbies

Summer vacations, fishing on the Chesapeake Bay, local community events, and other personal reflections.

Read life posts →